MOISTURE & HYDROCARBONS TRAPS SERIES

High capacity & purity traps. All Stainless Steel made of; this series offers the best performances for ultra high purity gas applications. Perfectly suitable for bulk purification applications or where several instruments are plumbed from a single gas source.

Having 15 microns, 1 inch diameter particle filter, this 316 Stainless Steel all-welded-in-line filters installed on the inlet/outlet ensures to minimize the restriction to the passage of high flow rate and keeping the particles away from the analytical instruments.

By default, the inlet/outlet fittings are 1/8’’ Stainless Steel compression type, but other sizes/types can be made on request.

The traps having more than 300cc volume offers refillable capability. The small 50cc volume trap version offers regeneration possibility

MOISTURE TRAPS SERIES

Material: 4A/13X Molecular Sieve

Part Number LDT-H2O-50 (old LD-H2O-T) LDT-H2O-300 LDT-H2O-500
  • LDT-H2O-1000
*Moisture Capacity (grams) 10 40 75
  • 150
Max Flow Rate (SLP)** 0.2 1 2
  • 5
Dimensions inches(cm) Length: 10’’ (25cm) Diameter: 3/8’’ (1cm) Length: 15’’ (38cm) Diameter: 2’’ (5cm) Length: 19’’ (48cm) Diameter: 2’’ (5cm)
Length: 16’’ (41cm) Diameter: 3.5’’ (9cm)
Volume (cc) 50 300 500
 1000
Price (USD) 325,00 695,00 745,00  980,00

* Moisture capacity is based at 25°C/77°F

** Reduce H2O to ≤ 5ppb

Trap regeneration or refill is 165,00USD (P/N: LDT-refill or LDT-regen)

HYDROCARBONS TRAPS SERIES

Material: Activated Charcoal

Part Number DT-HCs-50 (old LD-HC-T) LDT-HCs-300 LDT-HCs-500
  • LDT-HCs-1000
*Hydrocarbons Capacity (grams) 10 40 60
  • 120
Max Flow Rate (SLP)** 0.2 1 2
  • 5
Dimensions inches(cm) Length: 10’’ (25cm) Diameter: 3/8’’ (1cm) Length: 15’’ (38cm) Diameter: 2’’ (5cm) Length: 19’’ (48cm) Diameter: 2’’ (5cm)
Length: 16’’ (41cm) Diameter: 3.5’’ (9cm)
Volume (cc) 50 300 500
 1000
Price (USD) 325,00 695,00 745,00  980,00

* Capacity is based at 25°C/77°F

** Reduce total hydrocarbons (except CH4) to ≤ 10ppb 

Trap regeneration or refill is 165,00USD (P/N: LDT-refill or LDT-regen))

OXYGEN TRAPS SERIES

Material: Activated R3-11 Copper catalyst

Part Number LDT-O2-50 -VCR-1/8 (old LD-O2-T-VCR-1/8)
*Oxygen Capacity (grams) 100
Max Flow Rate (SLP)** 0.2
Dimensions Length coil: 48’’ Diameter coil: 5’’ Diameter tube : ¼’’
Volume (cc) 50
Price (USD) 570,00

* Capacity is based at 25°C/77°F

** Reduce Oxygen to ≤ 5ppb

Trap regeneration is 165,00USD (P/N: LDT-regen)

 

Columns

LDetek can also offer a large selection of Packed type columns that can cover your needs for any GC application. Our columns can be coiled within your specifications and can be activated/regenerated in house. LDetek also have the capabilities to configure your custom request. We can also offers numerous types of columns ending:

  • Stainless Steel or Brass Double ferrules type
  • Stainless Steel single ferrules type
  • Stainless Steel Face Seal fittings type
  • Silver brazed type
  • Argotek column LD12-3
  • HSR-Etek column LD12-7

Traps & Accessories Application Notes

LD12-7 Analysis of Neon-Hydrogen-Argon-Krypton-Nitrogen with the PlasmaDetek & the HSR-Etek column

Application Note LD12-7 (819 Ko)