Join us on Linked'in
WEIGHT
Download the complete specification and technical data sheet (2.54 mo)

LD8000

Online trace Nitrogen in argon,
Helium and Crude Argon analyzer

The LD8000 is an online analyzer to monitor trace N2 in Ar/He/Crude Argon. Plasma emission detector is used to selectively measure trace N2 in Argon or/and Helium bulk gases. The analysis of trace N2 in Neon, Xenon and Krypton can also be realized.

THE LD8000 SPECIFICATION

DETECTOR TYPE
  • Plasma Emission Detector for N2
RANGE FOR N2
  • 0 – 1 ppm, resolution to 10 ppb
  • 0 – 10 ppm, resolution to .1 ppm
  • 0 – 100 ppm, resolution to 1 ppm
  • other range possible up to 10000 ppm configurable
STANDARD FEATURES
  • Manual or autoranging (user selectable)
  • Microprocessor controlled
  • 5.6'' TFT intelligent LCD module with Touch Screen
  • Self diagnosis system with auto-resolve alarm
  • 4-20 mA isolated outputs
  • Alarm Historic
  • Safe calibration procedure to avoid any bad calibration
  • Digital outputs for remote monitoring: (all dry relay contacts)
    • - System status (1 output)
    • - Range in use (3 outputs per impurity)
    • - Calibration in use (1 output)
OPTIONS
  • Internal sampling system for zero, span and sample
  • Serial port: RS-232 / 422 / 485 / profibus
  • 2 alarm outputs (use programmable set point)
  • Zero calibration gas free system
GAS CONNECTIONS
  • Sample: 1/8'' compression fittings
  • Vent: 1/8'' compression fitting
CALIBRATION GAS
  • Zero: LDP1000 purified gas (getter)
  • Span: 8.0 to 9.5 ppm N2 and O2 (application dependant)
SAMPLE FLOW REQUIREMENTS
  • 75 to 200 sccm
OPERATING TEMPERATURE
  • 10 °C to 45 °C
SUPLLY
  • 115 VAC, 50 - 60 Hz or 220 VAC, 50 - 60 Hz
ACCURACY
  • Better then ± 1% full scale
DRIFT
  • < ± 1%
RESPONSE TIME
  • T90 < 10 seconds
WEIGHT
  • 29 lbs (13 kg)
OPERATING SAMPLE PRESSURE RANGE
  • 3-30psig (for lower sample pressure requirement, an additional high purity pump used)
OUTLET PRESSURE
  • Atmospheric
ENCLOSURE TYPE
  • 3U rackmount type
INGRESS PROTECTION
  • IP20 in accordance with IEC 60529
ENCLOSURE FINISH
  • RAL7030 powder coat
CERTIFICATION
  • In compliance with EMC directive 2004/108/EC, EN 61000-6-2:2005 for immunity & EN 61000-6-4:2007 for emissions

THE LD8000 ORDERING INFORMATIONS

-X
  • A: Argon
  • H: Helium
  • C: Crude Argon
  • D: Dual (Argon + Helium)
  • 120 : 120 volts
  • 220 : 220 volts
-XXX Oerating Voltage:
  • 120: 120 volts
  • 220: 220 volts
-X A: Alarm option
-XX Integrated sampling system
  • S1: 1 sample + zero + span
  • S2: 2 samples + zero + span
-X C: zero gas free system  
-XXX Serial communication
  • RS2: RS-232
  • RS4: RS-485
  • PFB: Profibus
-X P:Purge value and flowmeter

Certification:

CE

In compliance with EMC directive 2004/108/EC, EN 61000-6-2:2005 for immunity & EN 61000-6-4:2007 for emissions.

LD8000 Application Notes

LD8000 Trace Nitrogen in Argon or Helium analyzer - DESIGN REPORT

Design Report (2,6 Mo)